Windrow Elevator

• Price: Call for price

• Provides a continuous flow of material to the paver
• Improves production, material handling, continuous paver operation without stopping for truck exchanges, ride quality, and trucking costs
• Unique remixing auger reblends asphalt material just before they're delivered to the hopper to ensure that the materials are mixed and at a uniform temperature
• Proven reliable design
• Hydrostatic drive system
• High speed raise and lower to clear obstructions and speed setup
• Rear wheel width allows loading on trailer
• Telescoping paver attachment for ease of hookup
• Engine
  • Cummins QSB - 6.7 6-cylinder Tier 3 diesel engine
  • EPA Certified
  • 160HP @ 2400rpm
  • 80 gallon (303 l) fuel tank
• Elevating Conveyor
  • Conveyor start up warning alarm
  • 60 inch (152 cm) wide throat
  • 72 inch (183 cm) discharge height
  • Heavy duty roller flight chain
  • Heat treated flight wear edges
  • Replaceable two-segment drive chain sprockets
  • Replaceable hardened floor liner
  • High carbon alloy cutting edges (adjustable)
  • Heavy duty head and tail shafts with heavy duty bearings
  • Reversible elevator to clear obstructions
• Remixing Auger
  • 14 inch (36 cm) diameter cast Ni-Hard replaceable segments
  • Left and right-hand segments feed to the center for remixing
  • Hydraulic motors coupled to auger shaft
  • Forward/Reverse Control
• Paver Attaching Adapter
  • Telescoping paver attachment
  • Adjustable up to 24 inches (61 cm) to position dump point
  • Adapter fits most pavers
• Suspension
  • Four wheels have heavy duty caster assemblies
  • Two 8.25 x 15 - 18 ply pneumatic rear tires
  • Two 6.90 x 9 Solid Rubber front tires
  • Swing up towing frame with pintle ring
  • Rear casters pin for towing
• Controls
  • Engine Instrumentation (Ground Level)
  • Conveyor start up warning alarm
  • Emergency Stop
  • Engine increase/decrease
  • Pump increase/decrease
  • Cylinders up/down
• Hydraulic Drive System
  • Variable displacement pump is directly connected to the engine and drives two fixed displacement hydraulic motors with planetary gear boxes directly connected to conveyor head shaft
  • Auxiliary mounted gear pump drives and lift cylinders
  • 55 gallon reservoir (208 l)
• Dimensions
  • Length (with wings folded in): 14 feet, 6 inches (174 cm)
  • Height: 9 feet, 10.5 inches (301 cm)
  • Travel Width: 8 feet, 6 inches (259 cm)
  • Rear tires width outside/outside of tread in loading position: 8 feet (244 cm)
  • Front tires stationary width outside to outside of tread: 8 feet, 6 inches (259 cm)
  • Operating Width: 10 feet (305 cm)
  • Weight: appx 16,000 lbs. (7,250 kg)
• Optional:
  • Hydraulic Telescope Hookup
  • Hydraulic Plow
  • Swing-out Hydraulic Heat Exchanger (EZ Clean)
  • Wireless Remote
  • Material Modifier (patented)