Sales
Service
Locations
Employment
Contact Us
Call us at
Ontario:
(909)930-1822
Tracy:
(209)830-8600
New Equipment
American Road
Aquatech
Arrow
CEC
East
Ferguson
Gradall
Hamm
Hi-Way
HTC
Johnston
LeeBoy
Lincoln
Link-Belt
Midland
Miller
PB Loader
Petersen
Rosco
Trinity
Vogele
Wirtgen
Zieman
Used Equipment
CEC
Hamm
LeeBoy
Link-Belt
Midland
Misc
Rosco
Vogele
Manufacturers
Top
» New Equipment »
Petersen
»
TT2
Petersen TT2
Dump Trailer
Price:
Call for price
Available with single or dual axle
Electric brakes are standard
Body lights are inset or flush mounted
To avoid rust, design incorporates no 90° angles on lower portion of body sides
Comes standard with latching barn doors and six 3/4 inch (19 mm) fabricated plate hinges
Choice of sizes:
18 feet (5.49 m), 20 cubic yards (18 cu m)
18 feet (5.49 m), 24 cubic yards (22 cu m)
18 feet (5.49 m), 27 cubic yards (26 cu m)
Body floor: 3/16 inch (5 mm) single steel plate
Cross sills: 4 inch (10 cm) structural channel on 12 inch (30 cm) centers
Long sills: 8 inch (20 cm) structural channel
Headboard: 10 gauge steel continuously welded to the floor. Top rail is 3 x 4 inch (8 x 10 cm) formed channel.
Body sides: 10 gauge continuously welded to the floor
Side posts: 3 inches (8 cm) x 4 inches (10 cm) x 10 gauge formed channel on 24 inch (61 cm) centers, with 1/4 inch (6 mm) formed rear corner posts
Barn doors: Top and bottom positive locks and three hinges per door with two 5/8 inch (16 mm) thick straps
Body hoist: 15 ton dual hydraulic cylinder hoist
Frame: 2 x 8 x 1/4 inch (5 x 20 x .6 cm) steel tubing with six cross members. Long sills are one piece from pintle eye to hinge
Single axle: 15,000 pound capacity with dual wheels and tires. Electric brakes are standard (also available with tandem axle.)
Draw bar: Vertical load capacity of 15,000 pounds and 3 inch (6 cm) pintle eye
Body lights meet federal lighting standards, with mud glaps installed behind rear wheels
High grade primer and enamel finish paint
Manual jack stand mounted on tongue of trailer with sufficient capacity for disconnecting loaded trailer
Quick couplers on hydraulic lines and electrical hookup, including lights and brakes
Optional:
Electronic load covering device
Manual load covering device
Twin 10,000 pound axles
Air brakes
Hydraulic jack stand
3/16 inch (5 mm) reinforcement plates between floor and sides
Continuous welds for side posts
Six inch dual cylinder hoist (23 ton)
LED lights
2nd dump control valve mounted at operator's station
Petersen TT2 dump trailer
Printable Product Page
Shipping Information
|
Return Policy
|
Privacy Policy
|
Terms of Use
| Copyright © 2000-2009 Nixon-Egli Equipment Co. 2044 S. Vineyard Ave., Ontario, CA 91761 (909) 930-1822 and 800 E. Grant Line Rd., Tracy, CA 95304