Nixon-Egli Equipment Co.
Contact Us

Call us at

New Equipment
  American Road
  PB Loader

Used Equipment

Rosco SPRH-H

Chip Spreader

  • Price: Call for price
  • Application rate control computer monitors the actual speed of the chip spreader and varies the gate opining to maintain the set application rate
  • Smooth operation because the computer maintains a constant ground speed regardless of load conditions
  • Power train's front wheel drive feature delivers positive traction for smooth starting even on steep grades
  • Swing over controls provide driver with left and right hand operation for greater safety and increased visibility.
  • Oversized receiving hopper that is 9 feet, 6 inches wide allowing 3.5 yards struck capacity
  • Computer controls infinitely varies gate opening from operator's station while system maintains accurate application of aggregate regardless of changes in speed. Gates automatically close when machine is stopped.
  • Rubber side skirting runs the complete length of conveyor belts to prevent spillage of the aggregate
  • Wheel wells do not protrude into hopper area, blocking flow of the rock or reducing capacity.
  • Conveyor belts maximize cleanout of the receiving hopper because they start at the very bottom of the hopper.
  • Conveyor drive motors are on floating mounts for dependable low-maintenance performance.
  • Hydrostatic drive ensures smooth starts and stops. Application rate computer monitors speed and varies the gate openings to maintain the set application rate.
  • Chassis:
    • Lower members are structural box beams, unit welded to rear and front axle carriers.
    • Conveyor sides have welded front pyramid and bracings to form a completely unitzed structure
  • Power train
    • Hydrostatic front wheel drive with closed loop feedback control system.
    • 3 modes of operation for speeds of 0 - 20 mph, including automatic speed control
  • Engine:
    • Cummins Model 6BT5.9, 6 cylinder turbo-charged diesel, 359 cubic inches.
    • 152 HP at 2500 RPM
    • Liquid cooled
    • Heavy duty radiator
    • Variable speed governor
    • Dry-type air cleaner
    • Electric starter
    • Alternator
    • Battery
    • Fuel water separator
  • Lockable 50 gallon fuel tank
  • Rear axle
    • 4 wheel drive: Planetary final drives with 20,000 pounds capacity
    • 2 wheel drive: Planetary final drives with 22,000 pounds capacity
  • Front axle
    • Oscillating truck type
    • 25,000 pound rated capacity
  • Steering: Orbitrol type, full hydraulic powered. No mechanical linkage
  • Brakes:
    • Front: Two-wheel hydraulic power assist disc brakes
    • Rear: Hydrostatic dynamic braking with self-energizing disc type emergency/park brakes
  • Wheels and tires: Budd-Disc type with 11.00 x 22.5 load range H, 16-ply rated, truck type with highway tread
  • Positive locking hitch, hydraulic release with safety catch
  • Hydraulic system:
    • 4 element direct drive off main drive pumps
    • 2 two element pumps produce independent circuits for each conveyor
    • Hopper spread roll and agitator
    • Power steering
    • Power brakes
    • 30 gallon reservoir
    • filters, cooler, and valves included
  • Rear receiving system: 9 feet, 6 inches wide, 3.5 cubic yards struck capacity with feed control gates adjustable from operator's platform
  • Conveyors:
    • Two independently operating 20 inches wide direct hydraulically driven belts
    • Full length side skirting, self-cleaning tail pulley with adjustable and removable trough idlers
    • Variable speed conveyors and automatic conveyor control
  • Front spread hopper:
    • 10 foot standard width
    • Electro-hydraulic power gate control of 6 inch and 12 inch increments
    • Infinitely variable gate openings
    • Auto shut off
  • Driver's station:
    • Left-hand and right-hand stations with suspension seats with swing over steering wheel and control instrument panel.
    • Automatic conveyor control to control amount of material in spread hopper.
  • Operator's station: Right-hand, full length non-skid walkway and safety handrails with conveyor and deflector controls, and second hitch control
  • Instruments:
    • Ignition switch
    • Speed and direction controls
    • Engine throttle
    • Gauges:
      • Engine water temperature
      • Engine oil pressure
      • Tachometer
      • Fuel gauge
      • Voltmeter
      • Hydraulic temperature gauge
      • Hourmeter
      • Warning system with light and buzzer
    • Comes with lockable cover
  • Operating dimensions: 12 foot hopper and standard tires
    • Length: 24 feet, 6 inches
    • Width: 12 feet, 9 inches
    • Height: 8 feet, 4 inches
    • Wheelbase: 126 inches
    • Turning radius: 20 feet, 6 inches
    • Ground clearance: 7 inches
    • Tread width: 83 inches front, 91 inches rear
  • Toolbox
  • Ladders on each side and safety handrails
  • Electric backup alarm and warning horn
  • Light package
  • Leeboy Highway Yellow paint
  • Optional:
    • Hydraulic reversing capability provides quick reverse in tight spots by allowing the transmission to provide variable speeds in reverse up to 19 MPH.
    • Upgraded engine: Cummins 6BTA 200 HP turbo-charged diesel
    • Upgraded wheels and tires: Four 385/65R 22.5, load range J, duplex radial
    • Possible spread hopper widths: 11 feet, 12 feet, 13 feet, 13 feet 6 inches, 14 feet, 14 feet 6 inches, 15 feet, 16 feet
    • Remote individual gate control
    • Aggregate placement screen
    • Left-hand spread hopper walkway and handrails
    • Front hopper railings
    • Second front hopper agitator
    • Vandalism protection package
    • Stemco axle seals
    • Non-standard paint
Shipping Information | Return Policy | Privacy Policy | Terms of Use | Copyright © 2000-2009 Nixon-Egli Equipment Co. 2044 S. Vineyard Ave., Ontario, CA 91761 (909) 930-1822 and 800 E. Grant Line Rd., Tracy, CA 95304